|
|
Indian Motorcycles: Easy Brackets
Easy Brackets are an innovative two (2) point docking system that allows the quick and easy installation and removal of saddlebags. Easy Brackets use two (2) existing bolts holes in the fender rail of the motorcycle. By replacing the existing bolts with the docking posts and longer bolts provided in each kit, the Easy Brackets can then be instantly installed and locked into place.Because we make our Easy Brackets specifically for your Honda motorcycle model, you will receive all of the correct hardware with your order. The docking posts and bolts are especially designed to work perfectly with your Honda motorcycle, eliminating the hassles of adding spacing washers to either line up the docking posts or to achieve a good, tight fit.All models are sold in sets (both sides) and include all necessary hardware.
More Info >>>
|
C.B. Antenna
This kit mounts to the trunk just like OEM with included hardware. Fold down feature. Fits Honda GL1800 Gold Wing.
More Info >>>
|
BULLY™ 10MM STRAIGHT CABLE 7 FT. WITH DOUBLE LOOP
• 7 ft. x 10mm flexible braided cable• Straight cable with closed loops at each end• Easy to use with Bully™ Locks
More Info >>>
|
Engine Lower Side Covers
Replace the drab gray or color matched piece between the upper engine side cover and the rear step cover with shining chrome. Easily installs with only a Phillips head screwdriver, instantly brightening this dull area on the GL1500/6.
More Info >>>
|
Samson Silver Bullet Turn Out Mufflers Silver Bullet Dresser
SILVER BULLET MUFFLERS are available in a multitude of styles to personalize your bike. 29” long with turn-out ends.
More Info >>>
|
Chrome Mirror Units
These Show Chrome finished mirrors are an OEM replacement of the GL1500/6 color matched ones. Utilizes existing hardware.
More Info >>>
|
RIVER ROAD™ MONTEREY GLOVE - Men's
• Supple, all-leather construction• Perforated leather back for comfort• Gel pad in palm area provides comfort and nerve protection on long rides• Padded knuckles• 1 year manufacturer’s warranty
More Info >>>
|
Smooth Clutch and Brake Lever (pair)
Fits Honda GL1800 Gold Wing 2001-06.
More Info >>>
|
VTX1800C/R/S Frame Covers
6 inch wide X 8 inch tall. 1 set of 2 pieces consisting of left and right. Covers the entire cast (rough) portion of the frame below the side covers.The covers are laser cut and formed from .040 steel and triple plated chrome. They are attached by one polished stainless button head allen screw with an expanding rubber plug which is inserted into the swingarm pivot hole after the stock round chrome cap is removed. Further security is added by the use of double faced 3M body moulding adhesive strips.
More Info >>>
|
COBRA™ Boulevard Front Floorboard Kits
• Quick installation• Helps limit vibration• Made of mild stamped steel chrome-plated• Valkyrie boards are machined of billet aluminum
More Info >>>
|
ARAI PROFILE FULL-FACE GRAPHICS Sinister
• Long-oval fit • Brow Vent Faceshield Ventilation System provides cooling air in upper face area without holes in critical forehead area of the shell or in the impact-absorbing liner material • Optically-correct pre-formed faceshields–better vision, UV ray protection with less distortion • De-Mist Lock faceshield tab pushes forward to open the shield slightly–helps clear fogging • Removable Breathguard–reduces fogging by deflecting breath away from faceshield • CLC (Complex Laminate Construction) shell–fiberglass composite is stronger and lighter–allows use of softer, less-dense liner materials inside for increased rider comfort • FFS (FreeFlow System)–reduces wind turbulence while increasing the exhaust of hot air from the facial area • Dual Intake / Dual Exhaust Ventilation–dual TDF-2 top intake vents and DDL-3 bridged exhaust vents designed to draw significant volume of air from helmet interior • Multiple-Foam Interiors for comfort • Rear Exhaust Channel and Vent adds a racy look while drawing hot air from helmet interior • Fully removable liner and cheek pads • Enhanced pull down chin spoiler, increases exhaust of hot breath to minimize shield fogging • Meets or exceeds Snell and D.O.T. standardsArai Helmets are equipped with a standard clear faceshield
More Info >>>
|
Honda Shadow AERO VT1100 Tank Pad
Honda Shadow AERO VT1100 Beautifully crafted genuine split leather tankpad with Shadow embroidering. Everything you’ve come to expect in quality and style from the “Ledrie” brand.
More Info >>>
|
DUNLOP HARLEY-DAVIDSON D402 - Rear
• Engineered and tested with Harley-Davidson to provide maximum performance• 3-ply polyester casing with 2 fiberglass belts for greater load-carrying capability and stability• Offset center groove improves confidence over wet patches• Made in USA• TL = Tubeless, TT = Tube TypeSW = Slim WhitewallWW = White Wall• No returns or exchanges on tires please choose the correct tire or call 1-877-570-1532 for assistance.
More Info >>>
|
ARAI PROFILE FULL-FACE GRAPHICS Carr Freedom Red
• Long-oval fit • Brow Vent Faceshield Ventilation System provides cooling air in upper face area without holes in critical forehead area of the shell or in the impact-absorbing liner material • Optically-correct pre-formed faceshields–better vision, UV ray protection with less distortion • De-Mist Lock faceshield tab pushes forward to open the shield slightly–helps clear fogging • Removable Breathguard–reduces fogging by deflecting breath away from faceshield • CLC (Complex Laminate Construction) shell–fiberglass composite is stronger and lighter–allows use of softer, less-dense liner materials inside for increased rider comfort • FFS (FreeFlow System)–reduces wind turbulence while increasing the exhaust of hot air from the facial area • Dual Intake / Dual Exhaust Ventilation–dual TDF-2 top intake vents and DDL-3 bridged exhaust vents designed to draw significant volume of air from helmet interior • Multiple-Foam Interiors for comfort • Rear Exhaust Channel and Vent adds a racy look while drawing hot air from helmet interior • Fully removable liner and cheek pads • Enhanced pull down chin spoiler, increases exhaust of hot breath to minimize shield fogging • Meets or exceeds Snell and D.O.T. standardsArai Helmets are equipped with a standard clear faceshield
More Info >>>
|
ARAI CLASSIC/m OPEN-FACE SOLIDS Pearl Black
• Super Fiber Laminate shell–strong, lightweight, comfortable • Brow ventilation ducts • Washable interior • Multiple-Foam Interiors for comfort • Removable/Replaceable Cheek Pads–for custom fit • M style 4-way ventilation system (2 front and 2 rear vents) move cooling air throughout interior, displace hot air • Accepts standard 5-snap faceshield • Meets or exceeds Snell and D.O.T. standards
More Info >>>
|
Fuel Tank Side Accent Set
Chrome accent trim. Fits GL1500/6.
More Info >>>
|
SHOW CHROME™ LOWER RAIN DEFLECTOR
• Smoke acrylic rain deflectors mount to the bottom case guard with acrylic clamps• Each panel has a notch cut-out to allow case guard clamps to be installed if desired • Fits Honda GL1800 Gold Wing (01-05)• Mfg/N 52-725
More Info >>>
|
Motorcycle Double Wall Exhaust Yamaha Road Star
Yamaha Road Star Motorcycle Double Wall Exhaust. Double wall exhaust. Beautiful chrome finish, steel constructions for years of performance and long lasting good looks. Complete system
More Info >>>
|
Samson Big Guns II Rip Saws Dyna
BIG GUNS II improve performance. 1-3/4” head pipe with full coverage heatshield gives appearance of 2-1/4” pipe. Full coverage heatshield helps to hide unsightly discoloration. Heatshield, mounting bracket and hardware included with each style. 91-04 Dyna Models
More Info >>>
|
SUPREME LEGENDS PRO SMOOTH FORWARD CONTROLS - HONDA VTX1300 03-up
• Hidden hardware• Folding pegs, rubber inserts• DOT compliant• Available in Chrome or Black Anodized• Installation kit included
More Info >>>
|
Suzuki Motorcycle Lever Covers - Colored
Ever buy a set of one size fits all lever cover? I bet you were pretty unhappy about the quality and how it fit. The Lever Covers we carry are hand madefor your motorcycle by our manufacturer!You also have a choice of what color you want instead of just black. Choice is good!Thick hand made 8 Oz. Smooth Buffalo leather! You will not find thicker lever covers anywhere. These lever covers are thicker than other companies saddlebags leather!You pick the color and fringe length. You will not believe the quality of these thick lever covers. We now offer the option to have different colored laces and mix the fringe colors!You will also get a solid colored free matching key fob to match!Key fobs are always just one matching color and can't be customized any further on the order. Other sites charge as much as $10 for leather fringe key fobs, but it is our way of saying thanks by giving you this free one! Buffaloleather lever covers are soft and thick. When buying lever covers you should look for 8 Oz. thick quality leather.Sold in pairs.
More Info >>>
|
All Weather Cover for Tiny Tots Carrier
Our All Weather Cover for the Tiny Tots carrier is made from durable black PVC fabric. Elastic bottom and Velcro straps secure the cover to the carrier. Double pull zippered vents enables full control of airflow inside the carrier. The rear of the carrier is open so the pet can see out and so you can easily remove him from the carrier.We considered having the sides clear on these covers, and a number of customers have asked about this, but we discovered that the clear sides became brittle from sun exposure and could not be sewn or attached to the material is a durable fashion. We also found even on a cool day, the sun would cause the inside to quickly heat up.
More Info >>>
|
SHOW CHROME™ STEPPED FRONT CALIPER COVER
• Stamped steel chrome cover with all hardware provided to mount to the caliper• Fits Yamaha XVS1100 V-Star Classic• Mfg/N 63-605
More Info >>>
|
SHOW CHROME™ DRIVER FOOTPEG SETS
• Comes complete with the peg and stem mount• Fits Honda GL1800 Gold Wing (01-05)• Sold in pairs
More Info >>>
|
Tankpads leather standard Kawasaki Vulcan 800
Beautifully crafted genuine split leather tankpad. Everything you’ve come to expect in quality and style from the “Ledrie” brand.
More Info >>>
|
ARAI QUANTUM 2 GRAPHICS Schwantz
• Round-oval fit • Brow Vent Faceshield Ventilation System provides cooling air in upper face area without holes in critical forehead area of the shell or in the impact-absorbing liner material • Optically-correct pre-formed faceshields for better vision and UV ray protection with less distortion • De-Mist Lock faceshield tab pushes forward to open the shield slightly–helps clear fogging • Shell incorporates smaller gap between shield and shell to reduce wind noise, same breathguard as found in the RX-7 Corsair • Shell is Super Complex Laminate Construction (Super CLC), redesigned aerodynamic shape with molded details to add character, increase shell strength, and enhance the performance of the upgraded side exhaust vents • Chin Spoiler • Top mounted (TD-4) vent design is recessed into the shell for a clean look • Uses SAJ shield side pod like RX-7 Corsair and Astral for easier operation, uses the single span, dual pivot hinge chin vent as found on the RX-7 Corsair • Fully removable washable interior, cheek pads are the same as RX-7-RR4, Astral and Astral-X • Meets or exceeds Snell and D.O.T. standardsArai Helmets are equipped with a standard clear faceshield
More Info >>>
|
Universal 50mm Twisted Exhaust Bracket
Twisted chrome exhaust bracket. 50mm in length
More Info >>>
|
ARAI RX7 CORSAIR FULL-FACE GRAPHICS Tommy Gun Black
Relaxed round-oval fit • “Delta-3” top center intake scoop, scavenges more air to help improve airflow even further • Shell incorporates a reduced gap between the shield and shell to minimize wind turbulence over the shield and onto the shell • Chin vent design, with dual-pivot hinge mechanism, allows for a more easily operable single span vent gate with an increased airflow capacity • Enhanced organic shell shape, bottom trim and (non-removable) neck roll which curve in at the bottom to give a more natural appearance, which also helps minimize wind turbulence • Rubber breathguard, designed to better direct fresh air to the inside surface of the shield while at the same time directing hot breath down and away from the inside surface of the shield • SNC “Structural Net Composite” shell construction, utilizes a patented shell construction that incorporates a structural net reinforcing material, embedded between Arai’s® exclusive Super complex laminated construction layers, which improves resistance to shearing forces. This allows for more weight to be removed from the top of the shell, both reducing overall helmet weight and improving the center of gravity • Shell mold features to strengthen the shell, enhance airflow and overall appearance • Type-8 diffuser design with redesigned and improved intake and exhaust ports to both improve airflow and reduce wind turbulence • “Dry-Cool™ liner material, with a rich color and perforated satin feel, utilizes water cells to improve moisture and heat transfer from your head into the airflow around Arai’s® unique space frame liner. Leaves your head dryer and cooler at the end of a long or hot ride and allows the liner to dry much faster in between rides. Dimensions and mounting method of both the cheek pads and head liner are the same as previous RX-7RR series. Removable liner/cheek pads. • SAJ side pods have a lower profile and are much more flush with the shell of the helmet to provide a much cleaner look • Meets or exceeds Snell and D.O.T. standardsArai Helmets are equipped with a standard clear faceshield
More Info >>>
|
PRO PAD FLAGS
• 304 stainless steel• Highly polished finish• Stainless steel mounting hardware• Includes a 6” x 9” USA flag• All necessary allen keys for easy installation• All PRO PAD flags are made of a cotton/poly blend for optimal wear under road conditions• Screen printed on both sides• Double and triple stitched where necessary for increased durability• 6” x 9”
More Info >>>
|
Touring Heavy Duty Windshields Light Tint - National Cycle
National Cycle's largest and most popular Heavy Duty shield offers a larger windscreen than the Chopped Heavy Duty and excellent protection.Lexan¨ polycarbonate with FMR hardcoat is the highest quality motorcycle windscreen material available.It is virtually unbreakable, optically superior and can be repeatedly cleaned using conventional methods without scratching. Lexan FMR polycarbonate is the OEM motorcycle industry standard and was proudly developed for the motorcycle industry by National Cycle, Inc.All windshields come with standard flat chrome strapping.
More Info >>>
|
SHOW CHROME™ CRUIS WING™ HELMET LOCK EXTENSIONS
• Extensions allow for the securing of the helmet through its strap ring onto the bikes locking device • 1-3/8 inches wide design accommodates oversized “D” and “H” rings found on today’s helmets• Mfg/N 52-645
More Info >>>
|
ARAI RX7 CORSAIR Race Red
• Relaxed round-oval fit • “Delta-3” top center intake scoop, scavenges more air to help improve airflow even further • Shell incorporates a reduced gap between the shield and shell to minimize wind turbulence over the shield and onto the shell • Chin vent design, with dual-pivot hinge mechanism, allows for a more easily operable single span vent gate with an increased airflow capacity • Enhanced organic shell shape, bottom trim and (non-removable) neck roll which curve in at the bottom to give a more natural appearance, which also helps minimize wind turbulence • Rubber breathguard, designed to better direct fresh air to the inside surface of the shield while at the same time directing hot breath down and away from the inside surface of the shield • SNC “Structural Net Composite” shell construction, utilizes a patented shell construction that incorporates a structural net reinforcing material, embedded between Arai’s® exclusive Super complex laminated construction layers, which improves resistance to shearing forces. This allows for more weight to be removed from the top of the shell, both reducing overall helmet weight and improving the center of gravity • Shell mold features to strengthen the shell, enhance airflow and overall appearance • Type-8 diffuser design with redesigned and improved intake and exhaust ports to both improve airflow and reduce wind turbulence • “Dry-Cool™ liner material, with a rich color and perforated satin feel, utilizes water cells to improve moisture and heat transfer from your head into the airflow around Arai’s® unique space frame liner. Leaves your head dryer and cooler at the end of a long or hot ride and allows the liner to dry much faster in between rides. Dimensions and mounting method of both the cheek pads and head liner are the same as previous RX-7RR series. Removable liner/cheek pads. • SAJ side pods have a lower profile and are much more flush with the shell of the helmet to provide a much cleaner look • Meets or exceeds Snell and D.O.T. standards
More Info >>>
|
1 7/8" Exhaust Clamps from Highway Hawk
Standard chrome exhaust clamps. 1 7/8" (48 mm). Sold each.
More Info >>>
|
KURYAKYN™ Brake Pedal Pad
• Fits 99-06 Road Star (excl. Warrior), 96-06 Vulcan 1500, 98-06 Intruder 1500/C90• Simply drill one hole in your existing rear brake pedal
More Info >>>
|
KURYAKYN™ MAGNUM MIRROR
• Measures 5” x 2-5/8” • Chrome plating • Sold in pairs (Right & Left) • Installation on metric cruisers requires mirror adapters 49-7154 or 49-7155
More Info >>>
|
Suzuki Volusia FORWARD CONTROL KIT - Mapam
Suzuki Volusia FORWARD CONTROL KIT with FOOTPEGS 80 MMOne of a kind, beautifully chromed and exceptionally designed,with billet aluminum footpegs. Includes all necessary mounting hardware for a perfect fit and a quick installation. These forward controls move your feet approximately 3.5"" (8cm) forward.In stock!
More Info >>>
|
JAYBRAKE SHIFTER RODS
• Durable wear resistant heim joints at each end
More Info >>>
|
Ledrie Studded Windshield Bag
Beautifully crafted genuine leather windshield bag accented by smooth stitch lines. Everything you?ve come to expect in quality and style from the ?Ledrie? brand.
More Info >>>
|
Cruis Wing Kickstand
Replace OEM kickstand with the Cruis Wing¬ Series kickstand. Larger base promises more stability in rest position. Fits GL1800.
More Info >>>
|
Triumph Rocket III Handle Bar Risers
This set of risers replaces the stock risers and will bring the handlebars up 1" and back towards the rider 2".
More Info >>>
|
Honda Shadow VT750 Spirit Fat Pipes by Highway Hawk
Fat pipes staggered exhaust with buffles. Outside diameter of 55mm. Beautiful chrome finish, steel constructions for years of performance and long lasting good looks. Complete system
More Info >>>
|
Mini Halogen Driving Lights
These Mini Halogen driving lights are truly the smallest spot lights available, utilizing the bright 50 watt high intensity halogen bulb. Comes with mounting bracket and wire harness. Fits all GL1500/6 Gold Wings.
More Info >>>
|
Samson Big Guns II Shorty's Dyna
BIG GUNS II improve performance. 1-3/4” head pipe with full coverage heatshield gives appearance of 2-1/4” pipe. Full coverage heatshield helps to hide unsightly discoloration. Heatshield, mounting bracket and hardware included with each style. Heatshields included. 91-04 Dyna Models
More Info >>>
|
Samson Big Guns II Ground Pounders Softail
BIG GUNS II improve performance. 1-3/4” head pipe with full coverage heatshield gives appearance of 2-1/4” pipe. Full coverage heatshield helps to hide unsightly discoloration. Heatshield, mounting bracket and hardware included with each style. 86-04 Softail Models
More Info >>>
|
|
